|

Closed Loop Solar Heating
Systems are sustainable for single and multiple solar
heating Application systems. e.g. domestic solar water
heating, solar water heating hot tub, solar swimming pool
heating and solar space heating systems. The Close Loop
Systems suitable for areas with questionable water quality
and all climate conditions. The Closed Solar Heating Systems
are the preferred option for extremely cold areas. When
there is not enough energy for sun, electrical or gas
back element will automatically switched on by controller.
|
If you have taken steps to
retain your pools heat but are still not happy with your
heating bills, or if you plan to install a new pool, a
solar heater may be a good investment. Such heating systems
are on of the most cost – effective applications
of solar energy. It is relatively simple to integrate
a solar water heater since most pools require a pump,
filter and plumbing. With a solar energy system, the pool’s
water is pumped through the filter and then through a
solar energy collector(s) instead of directly back to
the pool. The sun heats the water in the collector(s)
before it returns it to the pool.
If you add a solar heater, you may need a pump larger
than your present one, or a separate smaller pump to pump
pool’s water to and through the solar collectors.
Adding any heater, solar or otherwise, will preclude selecting
the smallest pump. Nevertheless, you also may reduce pumping
time to help cut costs. For more details about Pool heating.
Please contact us.
|
 |
The solar collecting system
is capable of contributing significantly to space heating
requirements in many areas. The best use for solar energy
is to heat a building by radiant under floor hydraulic
heating, which requires water at a temperature of around
60°C. This system usually uses a concrete floor slab
with special water pipes running through it, to provide
a pleasant, even, low temperature radiant heat. The floor
slab will also provide heat. For more details about Space
Heating, please contact
us. |
- Simple Installation, No
Maintenance, Effective operation
- Easy Retrofitting to Existing systems
- Suitable for single and multiple solar heating Application
systems.
- Preferred option for extremely cold areas and questionable
water quality.
-
Incoming portable water routed to the solar storage tank.
- Porcelain Enamel or SUS316 Stainless Steel Storage Tank
with Electrical or gas backup
- Double-walled Copper Coil heat exchangers in storage
tank to prevent contamination of household water. |
|
|
|
|